BISSELL PowerFresh Vac & Steam 2747A review

BISSELL’s PowerFresh Vac & Steam 2747A is an unusual corded upright for sealed-hard-floor homes: it can pick up dry debris with its cyclonic vacuum while steam-mopping in the same pass, or run either function on its own. The key question is whether you want one pass for dry grit and a damp steam clean—not whether you need a machine to extract wet spills. The dirt container is designed to keep debris dry; this is not the dirty-water recovery setup offered by a wet/dry floor washer such as the CrossWave HydroSteam Plus 3518.

Three controls, not three steam levels

The exact 2747A product page identifies three cleaning modes: vacuum, steam, or both. That is a choice of functions, not a high/medium/low steam-intensity scale. In the combined setting, BISSELL says the vacuum captures dry dirt and debris while steam-mopping the floor. The product page also describes dry-tank technology, which keeps moisture away from the collected debris. That distinction matters: it can reduce the need to vacuum dry crumbs immediately before a mop pass, but it does not mean the machine collects dirty wash water in a recovery tank.

The machine is corded, with a listed 25-foot power cord. BISSELL gives an 11-inch cleaning path, a 12.8-ounce clean tank and a 10.1-pound unit weight. Those are useful planning numbers for doorways, fill stops, and moving the machine between rooms; they are not an independently measured room-per-fill or runtime claim. A cord offers continuous mains power, while requiring you to plan outlet changes and keep the cable away from the wet cleaning path.

Keep it on floors that permit steam

BISSELL presents the 2747A for sealed hard floors and names several examples on its product page. That is not permission for every floor sold as “sealed.” Check the flooring maker’s care guidance for the exact finish and construction, especially on wood, laminate, resilient floors, or a surface with wax or a coating. If steam is not explicitly allowed, choose a non-steam tool instead. The 2747A is not documented as a carpet-washing, upholstery, or fabric steamer, and its dry-dirt bin should not be confused with liquid extraction.

Water guidance is particularly specific: the manufacturer’s product-page FAQ says to use only demineralized water and not to add cleaning solution or vinegar. This is different from an ordinary mop reservoir that accepts floor cleaner. If you want to dispense a cleaning formula or recover a wet spill, this is the wrong operating plan. The model-specific 2747A user guide was not located in the official support route checked for this assessment; the 1132-series guide returned from a related support link is not an exact 2747A manual, so I do not transfer its instructions or kit details to this model.

Where the alternatives differ

For the task “pick up dry debris and steam in one pass,” the 2747A’s arrangement is more relevant than a conventional pad-only mop. Its vacuum and steam functions can also be used separately, so you can dry-vacuum first and avoid steam when a floor does not permit it. The manufacturer does not publish a separate steam intensity in the facts reviewed here, however, and the three mode controls should not be read as three heat settings.

The CrossWave HydroSteam Plus 3518 takes a different route: it is a wet/dry floor washer with clean- and dirty-water tanks, and its manufacturer describes steam, solution cleaning and vacuum recovery together in SteamWash mode. If you need to pick up dirty liquid or want a recovery tank, consider that type of machine instead. If you only need a simpler steam mop with a washable pad and no dry vacuum motor, the PowerFresh 1940A is a more conventional floor-mop comparison. These are different jobs and controls, not a speed or cleaning-performance ranking.

Who should shortlist it

Consider the 2747A if most of your routine is on manufacturer-approved sealed hard floors, you regularly want dry debris picked up during the steam pass, and you are comfortable with a cord and a water-only setup. It may be a poor fit if your must-have is liquid spill recovery, variable steam flow, an above-floor attachment, or a solution-dispensing wet mop. In those cases, filter for a documented wet/dry recovery washer or a detachable steamer rather than treating “vacuum and steam” as a general wet/dry promise.

Use the exact model name when checking a seller listing: PowerFresh Vac & Steam 2747A. The official page and its gallery establish the model and its displayed configuration; they do not establish a particular retailer’s stock, used-unit condition, or box contents. Verify the rating label and seller’s included items before purchase. This assessment is based on BISSELL’s exact-model page and associated image, not hands-on testing or a performance comparison.

Manufacturer references: BISSELL PowerFresh Vac & Steam 2747A. For a wet-recovery comparison, see the CrossWave HydroSteam Plus 3518 review.